Welcome to Tribbeck.com

STLCutter 2

A while ago, I (along with Aeon Sportscars) started to make a 5D CNC milling machine to make the buck for the mould for my car design. It was going to mill the whole car in one go - however, since we had no idea if it would work, it was scaled down quite dramatically after construction (smaller cutting sizes, and 2.5D instead of 5D), and it was too weak for proper operation. So, a new design was called for using the proper parts.

This chronicles the build - which is hoped to take 10 days.

Updated: 2012-10-21 19:26:22 | Comments: 0 | Show comments | Add comment
© Copyright 1997-2019
Tribbeck.com / Jason Tribbeck
All trademarks are the property of their respective owners.